H.5 – servohydraulic testing machines 00 series
Axial dynamic servo hydraulic testing machines series H. 5 series 00 in vertical design up to 500kN with servo cylinder in the foundation are designed to perform low and high cycle fatigue tests, fracture toughness, crack propagation, etc. This series of machines is characterized by high frame rigidity and mechanical resistance. The range of a given machine depends on the dynamic stroke and frequency. A specific test set is derived from these parameters, which consists of a test frame, a servo-hydraulic cylinder and a hydraulic unit.
Key features of the H.5 series with a cylinder in the basic foundation
VIDEOS on LabTest H.5 series testing machines
Installation of test fixtures in a high temperature chamber
Příprava příslušenství pro tahové zkoušky ve vysokoteplotní komoře do 1200°C dle normy EN ISO 6892-2 s bezkontaktním extenzometrem ONE.
Dynamic durability life test of load springs
LABORTECH H.5 series testing machines can be tested and assessed for conformity under GMW 14656. This standard describes GM’s requirements for materials, manufacturing process and coatings used in the manufacture of automotive springs and leaf springs.
Dynamic test of shock absorbers for railways
Dynamic testing of shock absorbers in different dynamic cycles with different testing amplitudes guarantees 100% testing of the shock absorber function.
Find out the parameters of your own dynamic test set!
All HAD hydraulic units we offer have a low noise level.
TESTING ON LABTEST H.5 MACHINES WITH VARIOUS ACCESSORIES
Tests with extensometers and measuring probes
Tensile test with extensometers in accordance with EN ISO 9513, EN 6892-1, ISO 12106, ASTM E606, DIN 50100, ASTM E399, ASTM E647, ASTM E466, etc.
Test with various jigs and clamping grips
Various types of clamping grips and test fixtures for fastening and dynamic testing of metals, carbon, plastics, laminates, etc. for dynamic tensile, compressive and bending tests according to EN 6892-1, ISO 12106, ASTM E606, DIN 50100, ASTM E399, ASTM E647, ASTM E466 etc.
Test with high temperature furnace and temperature chamber
High temperature tensile and compressive dynamic tests according to ISO 6892-2 Method A1, EN 6892-1, ISO 12106, ASTM E606, DIN 50100, ASTM E399, ASTM E647, ASTM E466 etc.
Basic set of a dynamic testing machine
Focus on these 3 basic machine parts…
Machine frame – hydraulic servo cylinders – edge coaxiality corrections
First of all, consider what you want to try. Based on this consideration, select the machine frame – series 00 or series 01.
If you have a high frequency of adjustment of the working space, then complete the machine with an automatic electro-hydraulic transfer and clamping of the crossbar.
For the H.5 series 00, a maximum piston rod stroke height of 100 mm is recommended. It also depends on which HA you chose from the previous table and whether you use a classic dynamic sealing ring or a hydrostatic piston rod guide for higher lateral loads on the servo cylinder.
Do you want to be sure? Use the BENTROD measuring and setting unit designed for evaluation and optimization of concetricity and edge coaxiality correction according to ASTM E1012, GES400 (NADCAP), GE450 and ISOTC 164SC5WG11
Selection of hydraulic unit including diagnostics
Hydraulic Unit (HU) selection
HU is designed as a compact hydraulic pressure unit designed for fatigue tests with water or air cooling.
HU equipped with HALT 18 – Diagnostic SIEMENS control system with system monitoring of conditions, pressures and service intervals via touch LCD.
The possibility of covering HU is made by a special anti-noise cover PAC <72 dB. Easy access from all sides using quick couplings allows easy handling around the HU (filter change, oil change, etc.). Thanks to the silent block suspension, the HU can be placed directly on the test room floor.
The connection between the HAD hydraulic unit and the machine frame is made using the VOSSFORM system, including the pressure test. Oil stains and gutters have no chance.
Appropriate selection of control unit and test software, including modules
Measuring and control electronics
EDCi Control electronics with synchronization of all measuring and control channels in real time with a sampling frequency of 10kHz.
Choose the RMCi7 or RMCi8 series remote control with OLED display integrated CENTRAL STOP.
Basic parameters of electronics
Analog signal resolution level ± 250,000 divisions (20 ms). Internal frequency 64 bit, data acquisition 32 bit, AD 24 bit, arithmetic, sampling frequency 10kHz. Integrated RS232 for VIDEO extensometers. PC connection – Ethernet 10/100 Mbit, USB 2.0.
Machine control and testing evaluation
Test & Motion + software – DYNPACK – intuitive software for long-term dynamic tests that you will fall in love with. All you have to do is choose the test modules according to the given test standards and you can test the samples.
Test&Motion+ – DYNPACK Software
Intuitive software for long-term dynamic tests…
Test & Motion + – DYNPACK – intelligent, intuitive and powerful software that will help you increase productivity and testing quality in your test rooms and testing laboratories. You can streamline, refine, and accelerate your testing and adapt your testing environment to make it easy for operators to measure the mechanical properties of materials in a dynamic single-axis or multi-axis test mode with support for EN, ISO, DIN, ASTM, and GOST standards.
A solution that can precisely and easily set the coaxiality of a dynamic system
Zkušební zátěžové rámy řady H.5 firmy LABORTECH vykazují vynikající tuhost a souosost, což minimalizuje napětí v ohybu pro zvýšení přesnosti testu a snížení rozptylu dat. Správné vyrovnání zabraňuje mimoosovému namáhání ohybem, které může vzorek znehodnotit (pořízení a výroba vzorku je velmi nákladné) nebo výsledná data budou zkreslená a tudíž nepoužitelná. Měřící a nastavovací jednotka BENTROD určená pro vyhodnocení a optimalizace soustředné i hranové korekce souososti (nesrovnanosti) upínacích čelistí pro statické a dynamické zkušební stroje dle normy ASTM E1012, GES400 (NADCAP), GE450 a ISOTC 164SC5WG11